Let op: Je maakt gebruik van een sterk verouderde webbrowser waardoor deze website mogelijk niet goed functioneert, stap nu over op een moderne webbrowser.

Verti-Drain® 7212


Verti-Drain® 7212

The Verti-Drain 7212 are well suited to lower hp tractors where acces is restricted or a lighter footprint is required.


Working width m:1.2 m
Working width inch:48 inch
Max working depth mm:250 mm
Max working depth inch:10 inch
Working speed at hole spacing 65 mm kmh:1.00 km/h
Working speed at hole spacing 2-12 mph:0.6 mph
Weight kg:470 kg
Weight lbs:1030 lbs
Hole distance with 12 mm tines mm:65 mm
Hole distance with 12 x 6 tines inches:2.5 inch
Hole distance with 18 mm tines mm:100 mm
Hole distance with 34 x 9 tines inches:4 inch
Hole spacing driving distance direction mm:25 - 165 mm
Hole spacing distance driving direction inches:1 - 6-1/2 inch
Max diameter-solid tine mm:18 x 250 mm
Max diameter-solid tine inches:3/4 x 10 inch
Max diameter hollow tine mm:25 x 250 mm
Max diameter hollow tine inches:1 x 10 inch
Min tractor hp required:18 HP
Min lifting capacity kg:570 kg
Min lifting capacity lbs:1250 LBS
Max capacity with spacing 65 mm m2hr:1200 m²/hr
Max capacity with spacing 2-12 ft2hr:11000 ft²/hr
Three-pointhitch:3-point CAT 1
Rpm max:500 rpm
Gear case oil:80W90
Lubricant:EP 2
Dimensions mm:1350 x 800 x 1100 mm
Dimensions inch:54 x 32 x 44 inch
Slip clutch setting:400 Nm

Standard components

Solid tines 12 x 250 mm (1/2 x 10")
3-speed gearbox
Front and rear roller
Toolbox with combi tool and manual


Hollow tines