Total of 148 results (page 3 of 7).
The Vibra-Sandmaster de-compacts & adds surface drainage to the soil profile all in one pass. Integrated within the Vibra-Sandmaster is the Verti-Quake® 2516, this de-compacts and opens the soil to depth of 250 mm. Vibrating coulters fill the slits with sand to leave minimal surface disruption.
The Extreme Clean has been designed to renovate filled carpets. The machine utilises horizontally rotating scrubbing brushes to breathe new life into compacted or previously neglected areas. The stiff bristles loosen infill and lift flattened fibres to reinstate playing characteristics
The Cultipack Seeder is ideal for the seeding of smaller or more sensitive areas, the stand-on chariot is towed by a two-wheel tractor for speed and manoeuvrability. The rings on the tractor create furrows for the seed before the machine accurately distributes seed ready for covering & germination.
The Verti®-Groom SV has a set of tines a to de-compact infill on synthetic turf. The wheels on the Verti-Groom allow for the exact setting of the desired working depth while the tough 5.5mm (3/16”) tines rake through infill material breaking up compaction
The land driven Rink H1500 drop spreader is favoured due to its simple yet tough design. The H1500 has an adjustable gate to control the amount of material spread & a lever to start/stop the spreading from the operator’s seat. The Optional rear brush sweeps the material in leaving a neat finish
The Top-Brush 6000 has three independently adjustable brush units. The hydraulically powered brushes float to follow contours and can be rotated in either direction. The Top-Brush is ideal for disease control, general surface preening, pre-cut preparation and the brushing of top-dressing materials.
The Easy-Core is a pedestrian punch-action aerator suited to small areas and places with restricted access. The coring tines rapidly remove soil to aid de-compaction while optional solid tines can be fitted should soil conditions require. The Easy-Core’s handles can be folded to aid transport.
The Multivator is a unique sports turf renovation implement carrying out de-compacting and top dressing by recycling buried soil/ root zone up to the surface and incorporating back into the root structure, saving time and money from importing materials.
The Blecavator 145 is a one pass ground preparation tool, cultivating & digging down to 10-18 cm (4″ – 7″) lifting & screening the stones and debris down to between 13-51 mm (0.5″ – 2″) through the adjustable screening tines – burying the stones and debris. The rear roller leaves a neat finish.
The Rink H620 Hand spreader is especially useful to spread topdressing material in difficult to reach areas or tight spots. The wheel driven auger meters out the material according to the travel speed while a simple on/off bar can be moved by foot to start and stop the spreading of material.
The Blecavator 210 is a one pass ground preparation tool, cultivating & digging down to 10-18 cm (4″ – 7″) lifting & screening the stones and debris down to between 13-51 mm (0.5″ – 2″) through the adjustable screening tines – burying the stones and debris. The rear roller leaves a neat finish.
The Multi-Sport combination implement tool offers many features in one unit. The integrated Slitter, Rake, Roller and Brush can be adjusted to varying depths or taken out of use as conditions require. The Multi-Sport is very popular in sport fields, municipalities and grassroot sport areas
The Base-Rake with tines & soft brush is ideal for the intensive brushing & de-compaction of filled synthetic carpetsystems. The front brush agitates and erects the pile before the tines de-compact the infill material prior to the rear brush preening & levelling the surface leaving it safe & open.
The Base-Rake with tines & brush is ideal for the intensive brushing & de-compaction or filled synthetic carpet systems. The front brush agitates and erects the pile before the tines de-compact the infill material prior to the rear brush preening and levelling the surface leaving it safe & open
The Verti-Quake® de-compacts the soil profile with powered offset blades. The blades rotary action, combined with the forward speed created a wave motion to move the ground laterally and de-compact consistently from the top of the soil to full working depth with little playing surface disruption.
The Turf-Stripper 1200 a fraise mower with interchangeable rotors, will remove turf, weeds and thatch from a different turf surfaces including hybrid turf (with the optional hybrid rotor). A side arm conveyor transfers the debris into a trailer for easy removal from the surface and a clean finish.
The towed Speed-Brush uses land drive to rotate the two independent bristle brushes against the direction of travel. The sweeping action works sand & other materials into holes / grass sward making the surface immediately playable. The brushes can be angled to move material inwards.
The Core Collector 1200 will quickly & cleanly collect cores from fine turf surfaces without leaving any marks thanks to its low ground pressure and smooth operation. the swath boards windrow the material to be collected before it is lifted into the hopper for emptying into a receptacle for removal
The punch-action Verti-Core III quickly cores turf surfaces while hold-down plates ensures no damage is caused to the surface in the process; Its belt drive systems ensure a high work-rate & neat hole pattern. The working depth can be easily adjusted as required by ground conditions and operators.
The Combi-Groom rakes levels and brushes synthetic turf surfaces in one pass. The magnetic system will collect and retain metallic detritus to leave de-compacted, level, and safe surface. The wheels allow for infinitely adjustable working depth to ensure results and performance.
The Laser-Grader 1800 has dual PVG16 valves fitted as standard to allow the machine to be controlled to a dual laser receiver for the most accurate control of the working depths and a perfectly level finish. Integrated ripping tines can be lowered to help break-up tough soils.
The Turf-Stripper 2000, a fraise mower with interchangeable rotors, will remove turf, weeds and thatch from a different turf surfaces including hybrid turf (with the optional hybrid rotor). A side arm conveyor transfers the debris into a trailer for easy removal from the surface and a clean finish.
The Double Disc Overseeder has two rows of discs to cut grooves 30mm apart in the soil, seed is accurately delivered into the groove before the roller closes the groove to protect seed. With a single hopper & easy seed rate adjustment, the DD range is an obvious choice for operators.
The Laser-Grader 1500 TPP has a 6.5 hp engine to power the hydraulic system independently from the towing unit. Dual PVG16 valves are fitted as standard to allow the machine to be controlled to a dual laser receiver for the most accurate control of the working depths and a perfectly level finish