Total of 195 results (page 2 of 9).
The towed Speed-Brush uses land drive to rotate the two independent soft bristle brushes against the direction of travel. The sweeping action works sand & other materials into holes / grass sward making the surface immediately playable. The brushes can be angled to move material inwards.
The floating twin spike rollers of the Multi-Seeder follow the contours, saturating the surface with small holes. the seed is then accurately distributed onto the surface before an adjustable brush sweeps the seeds into the holes. The rear roller then passed over to cover the seed for germination.
The floating twin spike rollers of the Multi-Seeder follow the contours, saturating the surface with small holes. the seed is then accurately distributed onto the surface before an adjustable brush sweeps the seeds into the holes. The rear roller then passed over to cover the seed for germination.
The all-new 2519 Verti-DrainĀ® combines robustness with versatility. This high-speed model can achieve a maximum working depth of 10”/250 mm with a range of tines, while offering unrivalled productivity; this makes the 2519 the obvious choice for applications where agility and productivity are key.
The Laser-Grader 1500 TPP has a 6.5 hp engine to power the hydraulic system independently from the towing unit. Dual PVG16 valves are fitted as standard to allow the machine to be controlled to a dual laser receiver for the most accurate control of the working depths and a perfectly level finish
The Vibra-Sandmaster de-compacts & adds surface drainage to the soil profile all in one pass. Integrated within the Vibra-Sandmaster is the Verti-QuakeĀ® 2516, this de-compacts and opens the soil to depth of 250 mm. Vibrating coulters fill the slits with sand to leave minimal surface disruption.
The Base-Rake with tines & brush is ideal for the intensive brushing & de-compaction or filled synthetic carpet systems. The front brush agitates and erects the pile before the tines de-compact the infill material prior to the rear brush preening and levelling the surface leaving it safe & open
The Base-Rake with tines & soft brush is ideal for the intensive brushing & de-compaction of filled synthetic carpetsystems. The front brush agitates and erects the pile before the tines de-compact the infill material prior to the rear brush preening & levelling the surface leaving it safe & open.
The Verti-TopĀ® Walk-Behind operates in the same principals as the larger Verti-TopĀ® 1200 and Verti-TopĀ® 1800 but is designed to access and work in smaller areas. The machine can pass through a standard 100 cm (40″) gateway and is particularly suited to tennis courts and five-a-side areas.
The Verti-DrainĀ® 7416 one of the most versatile aerators in the Redexim range. Capable of working to a depth of 14”/35 cm, the 7416 is well suited to work on sport fields, golf course and other fine turf areas. The tough chassis makes it the ideal Verti-Drain for a range of aeration tasks
The Verti-Rake’s spring tines work between the grass blades to loosen thatch. The adjustable tine angle allows for the aggression to altered while the working depth can be further adjusted for perfect results. The Verti-Rake can also be used to create a seed bed before overseeding.
The robust Verti-DrainĀ® 2216 is a high-speed unit, capable of handling a 24 mm / 1” diameter tine and working to depths of 22cm / 9”. Thanks to its heavy-duty construction, the 2216 is ideal for a range of creation applications where durability and speed is key.
The Speed-Seed models are ideal to overseed large areas quickly. The individual conical ring sections create seed pockets in the soil in which seed is accurately delivered, the holes are then closed with the roller; the additional spike rear roller increases the holes to 1918 per mĀ² (2294 ydĀ²).
The lightweight Verti-DrainĀ® 1513 can work to a depth of 6” / 150 mm and is well suited to sensitive turf surfaces. The belt driven machine operates a high speed while giving a neat and consistent hole pattern. An optional rear roller can be added to smooth the surface and leave a neat finish.
The Verti-Cut 1300 utilises specially designed Verti-Cut blades to cut lateral grasses & promote the growth of healthy turf by removing dead plant material thus allowing better water penetration & more area for roots to grow. The Verti-Cut is easily adjustable and robust making it a favoured tool.
The Blecavator 210 is a one pass ground preparation tool, cultivating & digging down to 10-18 cm (4″ – 7″) lifting & screening the stones and debris down to between 13-51 mm (0.5″ – 2″) through the adjustable screening tines – burying the stones and debris. The rear roller leaves a neat finish.
The integrated conveyor belt moves a range of materials to the rear of the hopper where it is dropped onto the discs for spreading up to 12m (472″). From the operator’s seat start, stop, alter the belt speed and changing of the spreading width can be done due to the electronic control unit.
The Speedseed models are ideal to overseed large areas quickly. The individual conical ring sections create seed pockets in the soil in which seed is accurately delivered, the holes are then closed with the roller; the additional spike rear roller increases the holes to 1918 per mĀ² (2294 ydĀ²).
The Rink DS800 disc spreader distributes a range of material, the integrated transport belt moves wet or dry material to the rear of the machine to be spread by the twin discs. The spreading width & thickness can easily be adjusted. The rear door closes to prevent material spillage in transport.
The Turf Tidy is a versatile sweeping machine, allowing for de-thatching, verti-cutting, sweeping or flail cutting. The Turf Tidy’s fully floating head follows the ground contours ensuring accurate cutting and excellent pick-up. The high-tip hopper can easily be emptied into a trailer or similar.
The Verti-DrainĀ® 7316 is a highly versatile machine, popular in sports fields, golf & municipality settings, it can handle the tougher conditions while remaining suitable for smaller chassis tractors. The three-speed gearbox makes it easy to further adjust the working speed for a perfect finish
The integrated conveyor belt moves a range of materials to the rear of the hopper where it is dropped onto the discs for spreading up to 12m (472″). From the operator’s seat start, stop, alter the belt speed and changing of the spreading width can be done due to the electronic control unit.
The lightweight Verti-DrainĀ® 1517 can work to a depth of 6” / 150 mm and is well suited to sensitive turf surfaces. The belt driven machine operates a high speed while giving a neat and consistent hole pattern. An optional rear roller can be added to smooth the surface and leave a neat finish.
The towed Speed-Brush uses land drive to rotate the two independent bristle brushes against the direction of travel. The sweeping action works sand & other materials into holes / grass sward making the surface immediately playable. The brushes can be angled to move material inwards.