Verti-Drain 7626

The 7626 is the heaviest and toughest Verti-Drain on the market. It is the ideal machine for the toughest of soil conditions, where a high productivity is needed. It weighs considerably more than the 75-series, and it has a heavier gearbox, PTO and rear roller support. Its adjustments have been made simpler. The tine-depth adjustments are made comfortably from the tractor seat via the hydraulic controls, while the original amount of ‘heave’ on the tine is left intact.

The optional wheel support is constructed extra robustly, while it falls within the 104 inch (2.6 meter) working width of the Verti-Drain. The forward speed is faster than that of the 75-series.

Download Verti- Drain 7626 Brochure
Download Verti-Drain 7626 Manuals

FeatureBenefit
Hydraulic Depth Adjustment
No need to leave the tractor seat
104” (2.6 m) Working Width High productivity
Weighs 4,254 lbs (1,930 kg) Able to penetrate even in the roughest conditions
Heavier Gear Box, Rear Roller and PTO Able to withstand the most punishing conditions
Optional Bogey Wheel Kit Transfers the weight of the machine off of the tractor
ModelVerti-Drain 7626
Working Width 104” (2.6 m)
Working Depth up to 16” (400 mm)
Tractor Speed @500 Rev’s at PTO
Spacing 2.5” (65 mm)
Spacing 5“ (130 mm)
Spacing 7.5” (195 mm)

Spacing @ 0.45 mph (0.72 kph)
Spacing @ 0.90 mph (1.4 kph)
Spacing @ 1.35 mph (2.17 kph)
PTO speed (Max) Up to 500 rpm
Weight 4,254 lbs (1,930 kg)
Hole Spacing Side-to-Side
2.5” (663 mm) with 0.5” (12 mm) tines
5” (127 mm) with 1” (24 mm) tines
Recommended Tractor Size
7626: 65 hp, with lift capacity of 5,070 lbs (2,299 kg)
7626H: 55 hp, double acting hydraulic connection is required
Capacity (maximum)
Spacing 2.5” (65 mm)
Spacing 5“ (130 mm)
Spacing 7.5” (195 mm)

20,989 sq. ft./h (1,950 sq. m./h)
41,979 sq. ft./h (3,900 sq. m./h)
62,969 sq. ft./h (5,850 sq. m./h)
Standard Tines1” x 16” (24 mm x 400 mm) solid
Three Point LinkageCat 2
Accessories Available– Hydraulic Wheel Kit
– 0.5” (12 mm) & 1” (24 mm) turf hold down kits

Tine Selections

The 7626 has 10 tine heads, each with four 12mm & two 24mm tine mounts, max. depth 16″

Part # Description Depth Total ID OD Wall Core Mount Qty.
SOLID TINES
311.112.2001/2 x 8 #8 10 na 12mm na na 12mm 30
311.118.200 3/4 8 8 10 na 18mm na na 18mm 20B
9990019 1/2 x 14 14 15-1/2 na 12mm na na 12mm 40
2381837 1/2 x 10 # 1012-1/2 na 12mm na na 12mm 40
2381841 3/4 x 10 10 12-3/4 na 18mm na na 18mm 20B
2381838 1/2 x 12 12 14 na 12mm na na 12mm 40
2382638 3/4 x 12 # 12 14 na 18mm na na18mm 20B
2382639 3/4 x 16 16 18 na 18mm na na 18mm 20B
2382640 1 x 16 16 18 na 24mm na na 24mm 20
311.112.1501/2 x 6 6 8 na 12mm na na12mm 40
311.108.150 5/16 x 6 6 8 na 8mmna na 8mm
311.105.125 3/16 x 5 5 5-3/4 na5mm na na 5mm 40N
9990056 5/16 x 7 7 9 na 8mm na na 8mm 40M/80*
9990059 5/16 x 10 10 11-1/2 na 8mm na na 8mm 40M/80*
CORING TINES
311.210.080 3/8 x 3-1/4 3-1/4 4-1/4 5/1 3/8 .045 1/4 8mm 40M/80*
311.210.1273/8 x 5 5 6 5/16 3/8 .047 1/4 8mm 40M/80*
9990022 5/8 x 7 7 8 1/2 5/8 .062 3/8 12mm 40
9990023 3/4 x 10 10 11-3/4 9/16 3/4 .094 7/16 18mm20B
9990024 1 x 10 10 11-3/4 9/16 3/4 .0947/16 18mm20B
9990034 1-1/4 x 12 12 14-1/2 7/8 1-1/4 .156 3/4 24mm 20
9990040 3/4 x 101011-1/2 9/16 3/4 .094 7/16 12mm 40
9990076 1 x 6 6 7 3/4 1 .125 5/8 12mm40
999F003 13/16 x 6 6 7-3/8 9/16 13/16 .105 1/2 12mm40
999F005 5/8 x 6 6 7 1/2 5/8.062 3/8 12mm 40
999F007 5/8 x 6 fixed shank 6 7 1/2 5/8 .062 3/8 12mm 40
ADAPTERS
314.208.043 M-8mm to 12mm na na 8mm 12mm na na na 40
314.205.043 N-5mm to 12mm na na 5mm 12mm na na na 40
2451800 B-3/4 to 1 # na na 18mm 24mm na na na 20
311.812.120X-1/2 Verti-Drill na na 1/2 na na na 12mm40
311.819.120Y-3/4 Verti-Drill na na 3/4 na nana 18mm 20
VERTI-DRILLS
311.812.230 1/2 x 10 Drill 10 10.5 na 1/2 na na 1/240X
311.819.230 3/4 x 10 Drill 10 10.5 na 3/4 na na 3/4 20Y&B

Accessories

Part #DescriptionNotesQty.
211.762.006 Hydraulic Wheel KitConverts from 3-pt mount to trailed unit with hydraulic lift frame & tires 1
211.752.002 Turf Hold Down Kit Aligns with 12mm tineholder holes 1
211.752.004 Turf Hold Down Kit Aligns with 18mm tineholder holes 1
9990211Pencil Tine Block KitHolds eight 8mm shank tines per head 10
211.752.004 Auxiliary Spring Kit Additional external spring for added tension 10
468.102.230 Tine head reinforcing plate Hardened plate bolts to bottom of tine head for additional strength10