Verti-Drain 7416

The Verti-Drain 7416 incorporates the technology of the second-generation Verti-Drain line with new and improved features which include a new angle adjustment up to 25 degrees. The 7416 has a working width of 64″ (1.6m) and is lighter weight than the 7516, thus can be used with smaller tractors.

Download Verti-Drain 7416 Brochure
Download Verti-Drain 7416 Manuals

FeatureBenefit
Unique adjustable parallelogram forced heaveShatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
3-speed gearboxMatches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential
Sealed bearings not bushingsLong maintenance free life
Simple tine designEasy to change and cheap to replace

ModelVerti-Drain 7416
Working width 64” (1.60 m)
Working depth Up to 14” (350 mm)
Tractor speed@500 rev’s at PTO
Spacing 2 1⁄2” (65 mm)
Spacing 5” (130 mm)
Spacing 7 1⁄2” (195mm)
-
Up to 0.55 mph (0.85 km/h)
Up to 1.10 mph (1.75 km/h)
Up to 1.60 mph (2.60 km/h)
PTO speed: (max) Up to 500 rpm
Weight 1,914 lbs (870 Kg)
Hole spacing side-to-side
5” (130 mm) @ 3/4” (18 mm) holes
2.5” (65 mm)@ 1/2” (12 mm) holes
Hole spacing in driving direction 1” - 7 1/2” (25 mm – 195 mm)
Recommended tractor size
35 HP with lift capacity of minimum 2,310 lbs (1,050 Kg)
Capacity (maximum)
Spacing 2 1/2” (65 mm)
Spacing 5” (130 mm)
Spacing 7 1/2” (195mm)
-
Up to 14,921 sq ft (1,387 sq m)/ hour
Up to 29,841 sq ft (2,773 sq m)/ hour
Up to 44,762 sq ft (4,160 sq m)/ hour
Maximum tine size
Solid 3/4” x 12” (18 mm x 300 mm)
Hollow 1 1/4” x 12” (25 mm x 250 mm)
Three point linkage 3- point CAT 1
Standard itemsSet solid tines to 3/4" x 12” (18mm x 300mm) with adaptors
Front and rear roller
3- speed gearbox

Tine Selections

The 7416 has 6 tine heads, each with four 12mm & two 24mm tine mounts, max. depth 14″

Part # Description Depth Total ID OD Wall Core Mount Qty.
SOLID TINES
311.112.2001/2 x 8 #8 10 na 12mm na na 12mm 24
311.118.200 3/4 8 8 10 na 18mm na na 18mm 12
9990019 1/2 x 14 14 15-1/2 na 12mm na na 12mm24
2381837 1/2 x 10 # 10 12-1/2 na 12mmna na 12mm24
2381841 3/4 x 10 10 12-3/4 na 18mm na na 18mm 12B
2381838 1/2 x 12 # 12 14 na 12mm na na 12mm 24
2382638 3/4 x 12 12 14 na 18mm na na 18mm 12B
311.112.150 1/2 x 6 6 8 na12mm na na12mm 24
311.108.150 5/16 x 6 6 8 na 8mm na na 8mm 24M/48*
311.105.125 3/16 x 55 5-3/4 na 5mm na na 5mm 24N
9990056 5/16 x 7 7 9 na 8mm na na 8mm 24M/48*
9990059 5/16 x 10 10 11-1/2 na 8mm na na 8mm 24M/48*
CORING TINES
311.210.080 3/8 x 3-1/4 3-1/4 4-1/4 5/1 3/8 .045 1/4 8mm 24M/48*
311.210.1273/8 x 5 5 6 5/16 3/8 .047 1/4 8mm 24M/48*
9990022 5/8 x 7 7 8 1/2 5/8 .062 3/8 12mm 24
9990023 3/4 x 10 10 11-3/4 9/16 3/4 .094 7/16 18mm 12B
9990024 1 x 10 10 11-3/4 9/16 3/4 .094 7/16 18mm 12B
9990034 1-1/4 x 12 12 14-1/2 7/8 1-1/4 .156 3/4 24mm 12
9990040 3/4 x 10 10 11-1/2 9/16 3/4 .094 7/16 12mm 24
9990076 1 x 6 6 7 3/4 1.125 5/8 12mm 24
999F003 13/16 x 6 6 7-3/8 9/16 13/16 .105 1/2 12mm 24
999F005 5/8 x 6 6 7 1/2 5/8 .062 3/8 12mm 24
999F007 5/8 x 6 fixed shank 6 7 1/2 5/8 .062 3/8 12mm 24
ADAPTERS
314.208.043 M-8mm to 12mm na na 8mm 12mm na na na 24
314.205.043N-5mm to 12mm na na 5mm 12mm na na na 24
2451800 B-3/4 to 1 # na na 18mm 24mm nana na 12
311.812.120 X-1/2 Verti-Drill na na 1/2 na na na 12mm 24
311.819.120 Y-3/4 Verti-Drill na na 3/4 na na na 18mm 12
VERTI-DRILLS
311.812.230 1/2 x 10 Drill 10 10.5 na 1/2 na na 12mm 24X
311.819.230 3/4 x 10 Drill 10 10.5 na 3/4 na na 18mm 12Y&B

Accessories

Part #DescriptionNotesQty.
211.741.002 Turf Hold Down KitAligns with 12mm tineholder holes 1
211.741.004 Turf Hold Down Kit Aligns with 2 4mm tineholder holes 1
211.751.010 Pencil Tine Block Kit Holds eight 8mm shank tines per head 1 kit
9200080Core CollectorPulls core to end of pass 1
211.731.010 Windrow Kit Funnels cores into a straight line behind machine 1