Verti-Drain 7316

The Verti-Drain 7316 is a very effective machine for use on all areas of your golf course. The 64 inch working width makes this model an ideal size for working on greens and tees. When using faster tractor speeds, it will aerate up to 44,760 square feet per on your fairways. The 7316 has a three-speed gearbox, which will match up to virtually any tractor.

Download Verti-Drain 7316 Brochure
Download Verti-Drain 7316 Manuals

FeatureBenefit
Unique Adjustable Parallelogram Forced HeaveShatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
3-Speed GearboxMatches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential
Sealed Bearings Not BushingsLong maintenance free life
Higher Working SpeedGreater working capacity
Usable Playing SurfaceAerate at any time without interruption to play
Simple Tine DesignEasy to change and cheap to replace

ModelVerti-Drain 7316
Working Width 64” (1.60 m)
Working Depth Up to 12” (300 mm)
Tractor Speed @ 500 Rev’s at PTO
Spacing 2.5” (65 mm)
Spacing 4” (100mm)
Spacing 6.5” (165mm)

Up to 0.55 mph (0.85 kph)
Up to 1.10 mph (1.75 kph)
Up to 1.60 mph (2.60 kph)
Maximum PTO speedUp to 500 rpm
Weight 1,480 lbs (670 kg)
Hole Spacing Side-to-Side
5” (130 mm) with 0.75” (18 mm) holes
2 1⁄2” (130 mm) with 0.5” (12 mm) holes
Hole Spacing in Driving Direction 1” – 7.5” (25 mm – 195 mm)
Recommended Tractor Size
28 hp, with 1,815 lbs (825 Kg) minimum lift capacity
Maximum Capacity
Spacing 2.5” (65 mm)
Spacing 4” (100 mm)
Spacing 6.5” (165 mm)


Up to 14,921 sq. ft./h (1,387 sq. m./h)
Up to 29,841 sq. ft./h (2,773 sq. m./h)
Up to 44,762 sq. ft./h (4,160 sq. m./h)
Shipping Dimensions
68” x 32” x 48” (1,700 mm x 800 mm x 1200 mm)
Maximum Tine Size
Solid 0.75” x 12” (18 x 300 mm)
Hollow 1” x 10” (25 x 250 mm)
Slip Clutch Setting PTO Maximum 4,400 lb-in (500 Nm)
Three Point Linkage 3-point CAT 1
Transmission Oil Life time grease EP 00
Lubrication Grease EP 2
Standard Items – Set solid tines to 0.5” x 10” (12 mm x 300 mm)
– Front and rear roller
– 3-shuttle gearbox

Tine Selections

The 7316 has 6 tine heads, each with three 12mm & two 18mm tine mounts, max. depth 12″

Part # Description Depth Total ID OD Wall Core Mount Qty.
SOLID TINES
311.112.2001/2 x 8 #8 10 na 12mmna na 12mm 24
311.118.200 3/4 8 8 10 na 18mm na na 18mm 12
2381837 1/2 x 10 # 10 12-1/2 na 12mm nana 12mm 24
2381841 3/4 x 10 10 12-3/4 na 18mm na na 18mm 12
2381838 1/2 x 12 # 12 14 na 12mm na na 12mm 24
23826383/4 x 12 12 14 na 18mm na na 18mm 12
311.112.150 1/2 x 6 6 8 na 12mm na na 12mm 24
311.108.150 5/16 x 6 6 8 na 8mm na na 8mm 24M/48*
311.105.125 3/16 x 5 5 5-3/4 na 5mm na na 5mm 24N
9990056 5/16 x 7 7 9 na 8mm na na 8mm 24M/48*
9990059 5/16 x 10 10 11-1/2 na 8mm na na 8mm 24M/48*
CORING TINES
311.210.080 3/8 x 3-1/4 3-1/4 4-1/4 5/1 3/8 .045 1/4 8mm 24M/48*
311.210.1273/8 x 5 5 6 5/16 3/8 .047 1/4 8mm 24M/48*
9990022 5/8 x 7 7 8 1/2 5/8 .062 3/8 12mm 24
9990023 3/4 x 10 10 11-3/4 9/16 3/4 .094 7/16 18mm 12
9990024 1 x 10 10 11-3/4 9/16 3/4 .094 7/16 18mm 12
9990040 3/4 x 10 10 11-1/2 9/16 3/4 .094 7/16 12mm24
9990076 1 x 6 6 7 3/4 1 .125 5/8 12mm 24
999F003 13/16 x 6 6 7-3/8 9/16 13/16 .105 1/2 12mm 24
999F005 5/8 x 6 6 7 1/2 5/8.062 3/8 12mm 24
999F007 5/8 x 6 fixed shank 6 7 1/2 5/8 .062 3/8 12mm 24
ADAPTERS
314.208.043 M-8mm to 12mm na na 8mm 12mm na na 12mm 24
314.205.043 N-5mm to 12mm na na 5mm 12mm na na 12mm 24
311.812.120 X-1/2 Verti-Drill na na 1/2 na na na 12mm 24
311.819.120 Y-3/4 Verti-Drill na na 3/4 na na na 18mm 12
VERTI-DRILLS
311.812.230 1/2 x 10 Drill 10 10.5 na 1/2 na na 1/2" 24X
311.819.230 3/4 x 10 Drill 10 10.5 na 3/4 na na 3/4" 12Y

Accessories

Part #DescriptionNotesQty.
211.731.006 (2007 & newer)Turf Hold Down KitAligns with 12mm tineholder holes 1
211.731.008 (2007 & newer)Turf Hold Down Kit Aligns with 18mm tineholder holes 1
9200080 Core Collector Pulls cores to end of pass 1
211.731.010Windrow KitFunnels cores into a straight line behind machine 1
9990214Needle Tine Block Holds twenty-four 5mm tines 6
9990208 Pencil Tine Block Holds eight 8mm shank tines 6
211.731.002 Hydraulic Rear BrushRotating bristle brush to incorporate topdressing into holes 1