Verti-Drain 7215

Building on the tradition of innovative excellence, the Verti-Drain 7215 incorporates the technology of the second-generation line with new and improved features. The 7215 boasts a working width of 61″ (1.56m) and can aerate up to 10″ (250mm) maximum, making for greater productivity when fit to a 25 hp tractor.

The 7215 offers reinforced front and rear rollers, as well as a lighter frame than the 73 series, thus having lower horsepower requirements.

  • Maintenance free, self-lubricated sealed bearings on all pivot points
  • Fully sealed greasable bearings on crankshaft, PTO and rollers
  • Lifetime grease in gearbox

Download Verti-Drain 7215 Brochure
Download Verti-Drain 7215 Manuals

FeatureBenefit
Unique adjustable parallelogram forced heaveShatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
3-speed gearboxMatches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential
Sealed bearings not bushingsLong maintenance free life
Higher working speedGreater working capacity
Useable playing surfaceAerate at any time without interruption of play

ModelVerti-Drain 7215
Working Width61” (1.56 m)
Working depthUp to 10” (250 mm)
Tractor speed@500 rev’s at PTO
Spacing 21⁄2” (65 mm)
Spacing 4” (100mm)
Spacing 61⁄2” (165mm)
-
Up to 0.60 mph (1.00 km/h)
Up to 1.00 mph (1.50 km/h)
Up to 1.60 mph (2.50 km/h)
PTO speed: (max)Up to 500 rpm
Weight1,210 lbs (550 Kg)
Hole spacing side-to-side4” (100 mm) @ 3⁄4” (18 mm) holes
2.5” (65 mm) @ 1⁄2” (12 mm) holes
Hole spacing in driving direction1” - 61⁄2” (25 – 165 mm)
Recommended tractor size25 HP with lift capacity of minimum 1,540 lbs (700 Kg )
Capacity (maximum)
Spacing 21⁄2” (65 mm)
Spacing 4” (100mm)
Spacing 61⁄2” (165mm)
-
Up to 16,813 sq ft (1,563 sq m)/ hour
Up to 25,866 sq ft (2,404 sq m)/ hour
Up to 42,678 sq ft (3,966 sq m)/ hour

Shipping dimensions69” x 32” x 44” (1.7m x 0.8m x 1.1m)
Maximum tine sizeSolid  3/4” x 10” (18 x 250 mm)
Hollow 1” x 10” (25 x 250 mm)
Three point linkage3- point  CAT 1
Standard itemsSet solid tines to 1/2” x 10” (12mm x 250mm )
Front and rear roller
3- shuttle gearbox

Tine Selections

Part #DescriptionDepthTotalIDODWallCoreMountQty.
SOLID TINES
311.112.2001/2 x 8 #810na12mmnana12mm24
311.118.2003/4 8810na18mmnana18mm16
23818371/2 x 10 #1012-1/2na12mmnana12mm24
23818413/4 x 101012-3/4na18mmnana18mm16
311.112.1501/2 x 668na12mmnana12mm24
311.108.1505/16 x 668na8mmnana8mm24M/48*
311.105.1253/16 x 55 5-3/4na5mmnana5mm24N/168*
99900565/16 x 779na8mmnana8mm24M/48*
99900595/16 x 101011-1/2na8mmnana8mm24M/48*
CORING TINES
311.210.0803/8 x 3-1/4 3-1/4 4-1/4 5/1 3/8 .045 1/4 8mm 24M/48*
311.210.1273/8 x 5 5 6 5/16 3/8 .047 1/4 8mm 24M/48*
99900225/8 x 7 7 8 1/2 5/8 .062 3/8 12mm 24
99900233/4 x 10 10 11-3/4 9/16 3/4 .094 7/16 18mm 16
99900241 x 10 10 11-3/4 9/16 3/4 .094 7/16 18mm 16
99900403/4 x 10 10 11-1/2 9/16 3/4 .094 7/16 12mm 24
99900761 x 6 6 7 3/4 1 .125 5/8 12mm 24
999F00313/16 x 6 6 7-3/8 9/16 13/16 .105 1/2 12mm 24
999F0055/8 x 6 6 7 1/2 5/8 .062 3/8 12mm 24
999F0075/8 x 6 fixed shank 6 7 1/2 5/8 .062 3/8 12mm 24
ADAPTERS
314.208.043M-8mm to 12mm na na 8mm 12mm na na na 24
314.205.043N-5mm to 12mm na na 5mm 12mm na na na 24
311.812.120X-1/2 Verti-Drill na na 1/2 na na na 12mm 24
VERTI - DRILLS
311.812.230 1/2 x 10 Drill 10 10.5 na 1/2 na na 12mm 24x

Accessories

Part #DescriptionNotesQty.
211.721.002 Turf Hold Down KitAligns with 12mm tineholder holes1
211.721.004 Turf Hold Down Kit Aligns with 18mm tineholder holes 1
211.721.006 Core Collector Pulls cores to end of pass 1
211.721.016Windrow KitFunnels cores into a straight line behind machine 1
314.425.170 Needle Tine Block Holds twenty-one 3/16" tines 8
9990206Pencil Tine BlockHolds six 8mm shank tines8