Verti-Drain 7212

This Verti-Drain incorporates all of the innovative technology of the second generation Verti-Drain line, making it the choice of championship courses throughout the world. The 7212 has a 3-speed gearbox, which will match up to virtually any tractor.

The popular Verti-Drain 7212 is ideal for use on greens and most sports turf surfaces where limited access or horsepower is available.

Download Verti-Drain 7212 Brochure
Download Verti-Drain 7212 Manuals

FeatureBenefit
Unique Adjustable Parallelogram Forced Heave
Shatters compaction in any ground conditions. Versatile with single-point adjustment for optimum results and hollow coring
3-Speed GearboxMatches your tractor’s ground speed exactly to achieve desired hole spacing. Creep speed tractor gear not essential
Sealed Bearings Not Bushings Long maintenance free life
Higher Working SpeedGreater working capacity
Useable Playing Surface Aerate at any time without interruption to play
Simple Tine Design Easy to change and cheap to replace
10” (250 mm) Penetration Relief of compaction, removing any hard pan of at depth up to 10” (250 mm)
2.5" (65 mm) Spacing Between
0.5" (12 mm) Tines
High density of aeration

ModelVerti-Drain 7212
Working Width 48” (1.20 m)
Working Depth Up to 10” (250 mm)
Tractor Speed @ 500 Rev’s at PTO
Spacing 2.5” (65 mm)
Spacing 4” (100 mm)
Spacing 6.5” (165 mm)

Up to 0.60 mph (1.00 kph)
Up to 1.00 mph (1.50 kph)
Up to 1.60 mph (2.50 kph)
Maximum PTO speedUp to 500 rpm
Weight 1,030 lbs (470 kg)
Hole Spacing Side-to-Side
4” (100 mm) @ 0.75” (18 mm) holes
2.5” (65 mm) @ 0.50” (12 mm) holes
Hole Spacing in Driving Direction 1” – 6.5” (25 – 165 mm)
Recommended Tractor Size
18 hp, with minimum lift capacity of 1,250 lbs (570 kg)
Maximum Capacity
Spacing 2.5” (65 mm)
Spacing 4” (100 mm)
Spacing 6.5” (165 mm)

Up to 12,933 sq. ft./h (1,202 sq. m./h)
Up to 19,897 sq. ft./h (1,849 sq. m./h)
Up to 32,829 sq. ft./h (3,051 sq. m./h)
Maximum Tine Size
Solid 0.75” x 10” (18 mm x 250 mm)
Hollow 1” x 10” (25 mm x 250 mm)
Three Point Linkage 3-point CAT 1
Standard Items– Set solid tines to 0.50” x 10” (12 mm x 250 mm)
– Front and rear roller
– 3-shuttle gearbox

Tine Selections

The 7212 has 6 tine heads, each with three 12mm & two 18mm tine mounts, max. depth 10″

Part # Description Depth Total ID OD Wall Core Mount Qty.
SOLID TINES
311.112.2001/2 x 8 #8 10 na 12mm na na 12mm 18
311.118.2003/4 8 8 10 na 18mm nana 18mm 12
2381837 1/2 x 10 # 10 12-1/2 na 12mm na na12mm 18
2381841 3/4 x 10 10 12-3/4 na 18mm na na 18mm 12
311.112.150 1/2 x 6 6 8 na 12mm na na 12mm 18
311.108.150 5/16 x 6 6 8 na 8mm na na 8mm 18M/36*
311.105.125 3/16 x 5 5 5-3/4 na 5mm na na 5mm 18N/126*
9990056 5/16 x 7 7 9 na8mm na na 8mm 18M/36*
9990059 5/16 x 10 10 11-1/2 na 8mm na na 8mm 18M/36*
CORING TINES
311.210.080 3/8 x 3-1/4 3-1/4 4-1/4 5/1 3/8 .045 1/4 8mm 18M/36*
311.210.127 3/8 x 5 5 6 5/16 3/8 .047 1/4 8mm 18M/36*
9990022 5/8 x 7 7 8 1/2 5/8 .062 3/8 12mm 18
9990023 3/4 x 10 10 11-3/4 9/16 3/4.094 7/16 18mm 12
9990024 1 x 10 10 11-3/4 9/16 3/4 .094 7/16 18mm 12
9990040 3/4 x 10 10 11-1/2 9/16 3/4 .094 7/1612mm 18
9990076 1 x 6 6 7 3/4 1 .125 5/8 12mm18
999F003 13/16 x 6 6 7-3/8 9/16 13/16 .105 1/2 12mm 18
999F005 5/8 x 6 6 7 1/25/8 .062 3/8 12mm 18
999F007 5/8 x 6 fixed shank 6 7 1/2 5/8.062 3/8 12mm 18
311.219.200 3/4 x 8 8 9-3/4 9/16 3/4 .093 7/16 18mm 12
311.219.2013/4 x 8 8 9-3/4 9/16 3/4 .093 7/16 12mm 18
311.225.200 1 x 8 8 9-3/4 3/4 1.0 .125 5/8 18mm 12
ADAPTERS
314.208.043 M-8mm to 12mm na na 8mm 12mm na na 12mm 18
314.205.043 N-5mm to 12mm na na 5mm 12mm na na 12mm 18
311.812.120 X-1/2 Verti-Drill na na 1/2 na na na 12mm 18
VERTI-DRILLS
311.812.230 1/2 x 10 Drill 10 10.5 na 1/2 na na 1/2" 18x

Accessories

Part #DescriptionNotesQty.
211.721.014 (2007 & newer)Turf Hold Down KitAligns with 12mm tineholder holes 1
211.721.012 (2007 & newer)Turf Hold Down Kit Aligns with 18mm tineholder holes 1
9100080 Core Collector Pulls cores to end of pass 1
211.721.016Windrow Kit

Funnels cores into a straight line behind machine 1
314.425.170 Needle Tine Block Holds twenty-one 5mm tines 6
9990206 Pencil Tine Block Holds six 8mm shank tines 6